How to use Yanhua Mini ACDP to Clear BMW EGS ISN

This article show step-by-step guide on how to use Yanhua Mini ACDP Programmer to clear BMW EGS ISN.

You Need:
Yanhua ACDP Basic Moduel
Clear EGS ISN Authorization for Yanhua ACDP
EGS module







Step 1:Build Connection between BMW EGS and Yanhua Mini ACDP Programmer.

Note:There are 3 methods,please choose according to your situation.


Connection Method 1:
Connect the 8HP end of the EGS interface board to the EGS module interface



Note:Aim the label point of the 8HP end of the interface board with the label point of the EGS interface during installation.

Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal




Note:Short the jumper cap to the “CAN-R-Join” end according to the marked position.

Connect the ACDP,OBP+ICP adapter,EGS interface board and EGS module




Connection Method 2:
Connect ACDP with vehicle OBDII port




Connection Method 3:
Connect ACDP to EGS interface according below diagram



 
Step 2:Clear BMW EGS ISN
Run Yanhua ACDP software and enter the menu to select “Clear EGS ISN”





Select “Clear ISN”,or if you have and problem please check the “Help” option



Done!

Article from:https://yanhuaminiacdp.blogspot.com/