Yanhua Mini ACDP New 8P Clamp User Guide

Yanhua Mini ACDP package updated one new 8p clamp for free since May, 2019.  With this long clip, the user is easy to observe and prevents the embedded chip from shaking. Also it adds one finger handle which is easy to hold and keep balance.

More Yanhua ACDP Tech,check here:Yanhua Mini ACDP Programmer
Attach several images of new 8p clamp photos taken from various angles:

How to use Yanhua ACDP Reads/Writes BMW FEM/BDC 95128/95256

This is for those who are looking for the best way to program (read/write) FEM/BDC 95128/95256 chips.


Traditionally, for FEM/BDC programming:
You need remove chip 95128/95256 from FEM/BDC and desolder for data read and write.

Desolder and solder the chip twice

Yanhua ACDP mini adds CAS4 keys: 3min done!

Here https://yanhuaminiacdp.blogspot.com show you the procedures on how to use Yanhua Mini ACDP software to program BMW CAS4 Keys,hope it helps!

Tested by uobdii.com
Look here: details with images...
Remove CAS4 from the car
The CAS is located under the steering wheel
Dismantle the CAS module

Prepare the following parts:
ACDP main unit
OBP+ICP
BDM01
20 pin cable
CAS4 adapter
BAV-KEY adapter
Working key
Key blank

Source: http://www.uobdii.com/wholesale/yanhua-mini-acdp-basic-configuration-with-bmw-cas1-cas4-plus.html

Procedurs:
Install the copper pillar
Find the location hole D1-D4